Service work & series production MANOSKOP® – indicating and cut-out
This electromechanical torque wrench combines the "indicating" and "cut-out" functions in a single tool; the function modes can be selected independently of each other. With a mount for interchangeable insert tools and QuickRelease safety lock; rapid setting using the convenient foil keypad and large display; tactile and acoustic trigger signal.
Differing tolerance limits can be set for each joint. Visual red and green signals in the display confirm the status of the joint.
Display also works for anticlockwise torque. Angle-controlled measurement using the Angle Module No 7395-1.
7500 data records can be stored, transferred via a USB interface and evaluated on the PC.
Automatic compensation to achieve correct tightening torque even if a changed extension is entered. Overload protection by means of acoustic and visual signals. The automatic keypad lock prevents inadvertent changes. Additional security for presets (function mode, trigger or preset value, unit of measurement, tolerance, save, deviating extension) using PIN code. Save time thanks to settle-resistant mechanism.
All the sensitive components are protected by the sturdy housing. The 2-component handle with its ergonomically designed green softer layers is resistant to oils, grease, fuels, brake fluids and Skydrol. Included in the set are two 1.5 V AA batteries. It is also possible to use rechargeable batteries (AA/LR6, NiMH, 1.2 V). Automatic notification of the next calibration date. Fully automated calibration using perfectControl calibrating unit No 7794-2.
In sturdy plastic case (size 40 and 65 in steel case). Units of measurement: N m, ft.lb, in.lb
Deviation of indication ± 2%. With certificate.
Our own patents are pending.