Service MANOSKOP® 730
Torque wrenches with tool carrier for interchangeable insert tools, with cut-out, with QuickRelease safety lock (size 5–65) dual signal, rapid adjustment (size 2–65), dual scale N m/ft.lb and N m/inch.lb. (size 5–80), long term accuracy and facility to accept insert/shell tools.
The robust steel tube completely encloses all working parts. The measuring element is only under load while force is being applied, no need for manual reset to zero. Any force applied to the tool after the "click" or applied in the opposite direction to the current function – e.g. forcible loosening of a jammed screw – does not act on the trigger mechanism and cannot cause damage to it. Reversible insert/shell tools allow anticlockwise operation.
Easily adjustable without disassembly, e.g. using torque tester No 7707 W or calibration system No 7706.
Deviation of indication ± 4%. With certificate.
Clasa : 2
Abaterea: ± 4%
Domeniu de actiune Nm: 4 - 20 Nm
Gradatie scala : 0,5 Nm
Dreptunghiul de prindere a capetelor (tip) : mama
Dreptunghiul de prindere a capetelor : 9 x 12mm
Dimensiunile fizice* :
- b : 27,5mm
- h : 23mm
- L : 178,5mm
- Lf : 174mm
- Sf : 17,5mm
Greutatea cheii : 315g
* Pentru dimensiuni vizualizati schita cheii
Aceasta cheie este livrata fara capete. Pentru a alege tipul de cap care vi se potriveste (in functie de lucrarile executate) va rugam sa consultati tabelul de compatibilitati aflat in sectiunea de download.
Atentie !
Cheile dinamometrice sunt instrumente de masura !
Periodic trebuie calibrate cu instrumente adecvate si daca este necesar reglate (vedeti DIN EN ISO 6789, 5.3 Recalibrari ).
Cheile sunt inseriate si se livreaza cu certificat emis de producator.
Optional se poate emite certificat metrologic emis de catre un laborator metrologic din Romania.
Pentru mai multe detalii va rugam sa ne contactati.