Service work & series production MANOSKOP® – indicating and cut-out

This electromechanical torque wrench combines the "indicating" and "cut-out" functions in a single tool; the function modes can be selected independently of each other. With a mount for interchangeable insert tools and QuickRelease safety lock; rapid setting using the convenient foil keypad and large display; tactile and acoustic trigger signal.
Differing tolerance limits can be set for each joint. Visual red and green signals in the display confirm the status of the joint.
Display also works for anticlockwise torque. Angle-controlled measurement using the Angle Module No 7395-1.

7500 data records can be stored, transferred via a USB interface and evaluated on the PC.
Automatic compensation to achieve correct tightening torque even if a changed extension is entered. Overload protection by means of acoustic and visual signals. The automatic keypad lock prevents inadvertent changes. Additional security for presets (function mode, trigger or preset value, unit of measurement, tolerance, save, deviating extension) using PIN code. Save time thanks to settle-resistant mechanism.

All the sensitive components are protected by the sturdy housing. The 2-component handle with its ergonomically designed green softer layers is resistant to oils, grease, fuels, brake fluids and Skydrol. Included in the set are two 1.5 V AA batteries. It is also possible to use rechargeable batteries (AA/LR6, NiMH, 1.2 V). Automatic notification of the next calibration date. Fully automated calibration using perfectControl calibrating unit No 7794-2.
In sturdy plastic case (size 40 and 65 in steel case). Units of measurement: N m, ft.lb, in.lb
Deviation of indication ± 2%. With certificate.

Our own patents are pending.

Tabel compatibilitati capete

Tabel recomandari alegere chei si forte de strangere

Stahlwille 7759-3 USB adaptor, cablu jack si software pentru No. 730D (96583627)

Pret:  639,55 RON

Stahlwille 7395-1 angle module for No. 730D (96583628)

Pret:  2306,72 RON

Clasa : 40
Abaterea: ± 2%
Domeniu de actiune Nm: 40 - 400 Nm
Domeniu de actiune ft.lb: 30 - 300 ft.lb
Domeniu de actiune in.lb: 360 - 3600 in.lb
Gradatie scala ( rezolutie display ): 1,0/0,1 Nm
Gradatie scala ( rezolutie display ): 1,0/0,1 ft.lb
Gradatie scala ( rezolutie display ):  10/1,0 in.lb
Dreptunghiul de prindere a capetelor : 14 x 18mm
Dimensiunile fizice* :
Greutatea cheii : 1765g
Greutatea cu cutie : 5155g

* Pentru dimensiuni vizualizati schita cheii

Aceasta cheie este livrata fara capete. Pentru a alege tipul de cap care vi se potriveste ( in functie de lucrarile executate ) va rugam sa consultati tabelul de compatibilitati aflat in sectiunea de download.

Atentie !

Cheile dinamometrice sunt instrumente de masura !
Periodic trebuie calibrate cu instrumente adecvate si daca este necesar reglate (vedeti DIN EN ISO 6789, 5.3 Recalibrari ).

Cheile sunt inseriate si se livreaza cu certificat emis de producator.
Optional se poate emite certificat metrologic emis de catre un laborator metrologic din Romania. 
Pentru mai multe detalii va rugam sa ne contactati.