Service MANOSKOP® 730N
registered design, clicking torque wrench with mount for interchangeable insert tools, rapid, accurate setting using QuickSelect quick-action adjuster, with QuickRelease safety lock, double stop signals, very clear twin scales with colour coded N m/ft.lb and ft.lb/inch.lb markings and long-term repeated accuracy.
The measuring element is only under load while force is being applied, no need for manual reset to zero. All the sensitive components are protected by the sturdy housing.
The 2-component handle with its ergonomically designed green softer layers is resistant to oils, grease, fuels, brake fluids and Skydrol.
Any force applied to the tool after the "click" or applied in the opposite direction to the current function – e.g. forcible loosening of a jammed screw – does not act on the trigger mechanism and cannot cause damage to it. The swap-over inserts can also be used to apply torque in an anti-clockwise direction.
Easily adjustable without disassembly, e.g. using tester No 7707 W or calibration system No 7706.
Deviation of indication ± 3%. With certificate.
Clasa : 5
Abaterea: ± 3%
Domeniu de actiune Nm: 10
- 50 Nm
Domeniu de actiune ft.lb: 7 - 37 ft.lb
Gradatie scala : 5
Nm
Gradatie scala : 1 ft.lb
Gradatie reglaj fin: 0,25 Nm
Dreptunghiul de prindere a capetelor : 9 x
12mm
Dimensiunile fizice* :
- b : 28mm
- h : 23mm
- L : 330mm
-
Lf : 280,5mm
- Sf : 17,5mm
Greutatea cheii : 831g
* Pentru dimensiuni vizualizati
schita cheii
Aceasta cheie este livrata fara capete. Pentru a alege
tipul de cap care vi se potriveste ( in functie de lucrarile executate ) va
rugam sa consultati tabelul de compatibilitati aflat in sectiunea de
download.
Atentie
!
Cheile dinamometrice sunt instrumente de masura !
Periodic
trebuie calibrate cu instrumente adecvate si daca este necesar reglate (vedeti
DIN EN ISO 6789, 5.3 Recalibrari ).
Cheile sunt inseriate si se livreaza cu certificat emis
de producator.
Optional se poate
emite certificat metrologic emis de catre un laborator metrologic din
Romania.
Pentru mai multe detalii
va rugam sa ne contactati.