Industrial MANOSKOP® 755
Torque wrenches with tool carrier for interchangeable insert tools, dual stop signal and cut-out.
Especially light and handy. Robust steel tube encloses all working parts. Any force applied to the tool after the "click" or applied in the opposite direction to the current function – max. to measuring range limit of torque wrench – does not act on the trigger mechanism and cannot cause damage to it. Reversible insert tools enable anticlockwise operation.
Deviation of indication ± 4%.
Industrial Manoskop No 755 is designed for continuous production work. Supplied without quick adjustment facility, the cut-out value has to be set with aid of STAHLWILLE Setting Gauge No 7707 W or calibration system No 7706.
If required, can be supplied with a preset trigger setting (price on application).

Tabel compatibilitati capete

Tabel recomandari alegere chei si forte de strangere

Clasa : 20
Abaterea: ± 4%
Domeniu de actiune Nm: 40 - 200 Nm
Domeniu de actiune ft.lb: 30 - 147 ft.lb
Dreptunghiul de prindere a capetelor : 14 x 18mm
Dimensiunile fizice* :

- b : 28mm
- h : 24mm
- L : 457mm
- L_f : 435mm
- S_f : 25mm

Greutatea cheii : 1060g

* Pentru dimensiuni vizualizati schita cheii

Aceasta cheie este livrata fara capete. Pentru a alege tipul de cap care vi se potriveste ( in functie de lucrarile executate ) va rugam sa consultati tabelul de compatibilitati aflat in sectiunea de download.

Atentie !

Cheile dinamometrice sunt instrumente de masura !
Periodic trebuie calibrate cu instrumente adecvate si daca este necesar reglate (vedeti DIN EN ISO 6789, 5.3 Recalibrari ).

Cheile sunt inseriate si se livreaza cu certificat emis de producator. 
Optional se poate emite certificat metrologic emis de catre un laborator metrologic din Romania.
Pentru mai multe detalii va rugam sa ne contactati.