Service MANOSKOP® 730N
registered design, clicking torque wrench with mount for interchangeable insert tools, rapid, accurate setting using QuickSelect quick-action adjuster, with QuickRelease safety lock, double stop signals, very clear twin scales with colour coded N m/ft.lb and ft.lb/inch.lb markings and long-term repeated accuracy.

The measuring element is only under load while force is being applied, no need for manual reset to zero. All the sensitive components are protected by the sturdy housing.
The 2-component handle with its ergonomically designed green softer layers is resistant to oils, grease, fuels, brake fluids and Skydrol.
Any force applied to the tool after the "click" or applied in the opposite direction to the current function – e.g. forcible loosening of a jammed screw – does not act on the trigger mechanism and cannot cause damage to it. The swap-over inserts can also be used to apply torque in an anti-clockwise direction.
Easily adjustable without disassembly, e.g. using tester No 7707 W or calibration system No 7706.
Deviation of indication ± 3%. With certificate.

Clasa : 10QR FK*
Domeniu de actiune Nm: 20 - 100 Nm
Domeniu de actiune ft.lb: 15 - 75 ft.lb
Gradatie scala : 10 Nm
Gradatie scala : 2,5 ft.lb
Gradatie reglaj fin: 0,5 Nm
Patrat de prindere a cheilor : 1/2"
Dimensiunile fizice* :
Greutatea cheii : 1129g
Greutatea cu cutie : 1554g

*Cap cu clicket cu mecanism pentru deblocarea rapida a cheii
** Pentru dimensiuni vizualizati schita cheii