Produse

Curs Valutar

EURO - 4,8744 RON
USD - 4,1145 RON
Producatori

FELO
KROLL
Norbar
NORMEX
PROXXON
SCALA MESSZEUGE
STAHLWILLE
TORQUELEADER
VBW

Sistem complet pentru testarea si calibrarea cheilor dinamometrice

Cod: 96521069
Cod EAN: 4018754179145
Numar: 7706-9 PC
Producator: STAHLWILLE
Stoc:  Info stoc
Address:
Nume:  
Telefon:  
Email:
Mesaj:
Scrieti codul
din imaginea
alaturata:
Inchide X
Pret:  40790,53 RON (include TVA)
Cantitatea dorita:    

DescriereDownloadNOTAContine
Complete calibration systems with matched components.

Calibration is the regular examination of the accuracy and reliability of torque tools.
This is done using specialpurpose calibrating equipment which is subject to stringent monitoring.
This is essential because torque tools are precision instruments which are very often in use in safetyrelevant environments.
They are expected to pro vide the same level of accuracy in their readings reliably over long periods of time.
In order to ensure these standards are guaranteed, it is essential that examination by means of calibration takes place at regular intervals and is documented.

Equipment required for calibration
At the very least, a calibration system must include the following components:
1. Mechanical loader
The mechanical loader is required for rapid, accurate fixing and operation of the torque wrench. The mechanical loader also ensures that the DIN EN ISO 6789 requirement for clicking
torque wrenches is fulfilled, i.e. that, above 80% of the final torque value, the force is applied slowly and steadily within a period of 0.5 to 4 seconds.
2. Transducer
The torque applied using the torque wrench is digitalised within the transducer and transmitted via USB cable to the PC, which ensures error-free transmission.
3. USB hub and USB cable
Up to 5 transducers can be connected to the USB hub. From here, the data are transferred to the PC.
4. Cable
You will require 1 cable fitted with jack plugs for each transducer which is permanently connected up.
5. Square drive adapter
The set includes the square drive adapters necessary to make full use of the measuring range of the transducers; e.g. for transducer No 7723-3 (internal square drive 3/4”), square drive adapter No 7787 (1/4” female to 3/4” male), No 7788 (3/8” female to 3/4” male) and No 7789 (1/2” female to 3/4” male).
6. Software
The data received in this way can then be used to issue a calibration certificate in accordance with DIN/ISO 6789.
Comenzi telefonice
Cautare

 
Autentificare
Cosul de cumparaturi  
Cosul meu (gol)
Nume Pret Cantitate / Actualizare Subtotal
Total:
Newsletter

Acest site utilizează cookie-uri

Folosim cookie-uri pentru a personaliza conținutul, anunțurile și pentru a analiza traficul. În cazul în care alegeți să continuați să utilizați website-ul nostru, sunteți de acord cu utilizarea modulelor noastre cookie.