Workshop torque tester Sensotork®
Electronic workshop torque tester for torque wrenches, consisting of:
• transducer (registered design)
• holder
• display unit (registered design)
• tripod for display unit (with 1.5 m cable)
• spiral cable
• mains adaptor (110 V–230 V with interchangeable socket adaptors) or direct connection to 12 V in-car supply is possible
• square drive adaptor (No 7707-2W, No 7707-2-1W, No 7707-2-2W, No 7707-3W)
• kit for attaching the unit to a workbench or wall in a horizontal or vertical testing position
for clockwise and anticlockwise use. Units of measurement: N m, ft.lb, in.lb. The easily interchangeable transducers are attached to the holder by means
of a QuickRelease safety lock. Low lateral forces thanks to low-profile transducers, automatic detection of the transducer, flexible and user friendly
because the unit can be used horizontally or vertically and the display unit can be placed in many positions, additional tripod with 1.5 m cable for
mounting the display unit to facilitate visual monitoring when using longer torque wrenches, especially broad measuring range from approx. 2% to 100%
of rated value. The software No 7759-2, including USB hub and jack cable (see p. 182), enables readings to be transferred to the PC for documenting and
for generating calibration certificates in accordance with DIN EN 6789:2003 (no separate power supply needed, power comes from PC). While individual
transducers are being recalibrated, the torque tester itself remains on-site for further use. Wide range of application (-20°C to +60°C).
Complies with DIN 51309: 2005, Class 2 and DKD-R 3-8: 2003. With certificate. Supplied in sturdy plastic case.
Domeniu de actiune Nm: 0,4 - 20 Nm
Domeniu de actiune ft.lb: 0,3 - 15 ft.lb
Domeniu de actiune in.lb: 3,5 - 177 in.lb
Patrat de prindere : 1/4"
Dimensiunile fizice* :
- b : 180mm
- h1 : 79mm
- h2 : 215mm
- t : 180mm
Greutatea fara cutie : 6255g
Greutatea cu cutie : 9500g
* Pentru dimensiuni vizualizati schita
Imaginile prezentate sunt doar in scop informativ. In functie de sistemul ales anumite componente pot diferi fata de imaginile prezentate sau pot fi omise din aceste imagini.