Torque Screwdriver with cut-out for controlled tightening in cN m and in.lb.
With 1/4" inside hexagon (F 6.3 DIN 3126/ISO 1173), with cut-out, for one-off jobs and production runs, disengaging clutch coupling, clockwise and counterclockwise operation, DIN EN ISO 6789, Type II, Category D.
With an additional locking mechanism to prevent the selected torque being inadvertently adjusted.
The measuring element:
The measuring element is a screw compression spring.
Adjustment:
The level is set steplessly via a rotary micrometer scale.
Safe working methods:
These clicking torque screwdrivers are equipped with a ratchet which disengages when the preset torque level is reached – preventing excessive torque
being applied. Deviation of indication ± 6%. With certificate.
A firm grip:
The shape of the handle and its surface texture ensure safe and accurate transfer of torque.
Insert tools (bits):
For all 1/4" hex E 6.3, Phillips-head screws, POZIDRIV/SUPADRIV®, straight-slot, TORX®, hex bits (see p. 152, 153). For very small joints, bits with a 4 mm
hex drive and an adaptor No 3115/2 for BITS screwdriver inserts, Type C4, and external hex 1/4" (E 6.3 DIN 3126/ISO 1173) are required.
Domeniu de actiune : 100 - 500 cNm
Gradatie scala : 2,5 cNm
Prinderea varfurilor : F 6,3
Lungime : 205mm
Greutate: 455g
Atentie !
Surubelnitele dinamometrice sunt instrumente de masura !
Periodic trebuie calibrate cu instrumente adecvate si daca este necesar trebuie reglate (vedeti DIN EN ISO 6789, 5.3 Recalibrari ).
Surubelnitele sunt inseriate si se livreaza cu certificat de conformitate.
Optional se poate emite certificat metrologic emis de catre un laborator metrologic din Romania.
Pentru mai multe detalii va rugam sa ne contactati.